Thermotec Heat Shields from Street and Circuit, Greece

Thermo Tec Heat Shielding products are at the cutting edge of the heat supression industry. Reducing underhood
temperatures can increase power by lowering the temperature of the air entering the engine. A drop of 10C can increase
power by 3.6% (Source: Banks Power)

Not only do thermotec product increase engine efficiency they also improve the looks of the engine bay.

Since 1987, Thermo Tec has been proud to offer customers the latest in exhaust insulating and heat protection technology. Our mission
has always been to use research, experience, and innovation to provide a quality product to our valued customers. Thermo Tec's goal is
to exceed our customers' expectations in solving the ever pressing destructive nature of exhaust heat. This mission is the fuel that drives
us to continue to create and develop the best possible solutions.

Applications for Thermo Tec's products are endless. We manufacturer over 130 products that either control heat dissipation or reflect heat
away from parts and components in an unlimited number of potential uses.

Currently, our products are used in every form of motor sports including NASCAR, NHRA, IHRA, Oval Track, and Off Road racing. Thermo
Tec is also involved in Military, OEM industrial, Aircraft, Marine, And Motorcycle Industries to name just a few. With our extensive testing
program, each product sold is of the highest quality.

The original Exhaust Insulating Wrap was developed in 1986 by Thermo-Tec. Exhaust Insulating Wrap is
an innovative way to create more horsepower and reduce under-hood temperatures.

Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density.
Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating
Wrap withstands continuous heat up to 2000°F, and contains no asbestos.

Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary
coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the
wrap's surface. This coating controls heat build-up and dissipation.

The multi-purpose stainless steel Snap Straps are used to secure the Exhaust Insulating Wrap - and more.

The high-temperature stainless steel straps have a narrow profile to fit tight spots, and can be cut to the
exact length needed.

Snap Straps secure with easy-to-use slide-through fasteners.

To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the
Hi-Heat Coating.

The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen
the surface, extend the life of wrap by protecting it from friction, and seal the pores to minimize the
penetration of harmful liquids.

The coating also works excellent as a paint directy on metal surfaces.

The Muffler/Catalytic Converter Heat Shield is made up of woven silica with a flexible mylar finish.

The highly-reflective heat shield can be installed between the catalytic converter, muffler, or any other
component to reflect radiant heat away from the undercarriage of the car.

This versatile heat shield has an unlimited number of applications. The kit includes all necessary fasteners.

The new quick-wrap high-velocity Exhaust Jackets are an innovative way to insulate and block radiant heat.

The jackets cover the tubes vertically allowing for a consistent fit. The fit allows the exhaust system to
expand as it comes up to operating temperatures without restrictions and provides air space for added
insulation.

This product uses Thermal Conduction Technology (TCT), developed by Thermo-Tec, and can be applied with
the headers in the vehicle.

The Header Manifold Blanket provides excellent heat-retention for exhaust headers and manifolds.

This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the
material should be facing the heat source, and the aluminized side facing away - offering protection from
abrasion and harmful liquid spills.

The Header Manifold Blanket is available in two sizes:

(2) 20" by 24" blankets for V6 & V8 applications, and (1) 36" by 40" blanket for straight 6 & 4 cylinder engines.

The Turbo Kit was designed to protect, improve performance, and eliminate turbo lag of a turbo charger.

This complete kit, to contain the heat produced by a turbo, fits a wide variety of turbines. The custom cut-to-fit
kit comes with an excessive amount of material to cover turbos from the smallest automotive application to
heavy-duty truck applications.

Two Turbo Kits are available - a four cylinder kit, and a six and eight cylinder kit. Each kit contains a roll of
Exhuast Insulating Wrap 1 or 2 inch, 1 yard of Aluminized Heat Barrier, and a 3" X 6" piece of Exhaust
Insulating Wrap. Hardware and instructions are included.

The Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly-reflective
surface of the material is capable of withstanding radiant temperatures in excess of 2000°F.

This product can be installed using standard rivets with a backup washer or weather strip adhesive. The use of
clamps or straps such as Thermo-Tec's Snap Strap can be used to hold the blanket in place for manifolds or
exhaust systems.

Thermo-Shield protects hoses and wires from radiant heat. Thermo-Shield is used in applications where it is
difficult or not practical to disconnect one end of the hose or wire.

The adhesive-backed composite construction tape can easily be wrapped around the hose or wire to make a
clean, professional appearance and protect parts from over 90% of radiant heat up to 2000 degrees farenheight

In today's high-heat environment, starters take in a lot of damaging heat that destroys the windings of the starter
and solenoid. To combat this problem, Thermo-Tec created a non-conductive strap-on heat shield with a
highly-reflective mylar surface.

The Starter Heat Shield will reflect over 90% of radiant heat, adding life to the starter and assuring reliable starts.

The Starter Heat Shield is a universal kit that fits all starters.

The new seamless lamination of a high-temperature fabric to a highly-reflective foil is the makeup of
Thermo-Sleeve, which provides protection from radiant heat for hoses and wires.

Thermo-Sleeve's ultra lightweight construction provides more insulating than traditional bulky rubber-coated
fiberglass. The aluminized sleeving reflects over 90% of radiant heat, and is fireproof and oil resistant.

Thermo-Sleeve is packaged in 3 or 12-foot lengths, and is sold in five different inside diameter sizes.
Thermo-Sleeve is available in custom lengths for special applications.

ADHESIVE BACKED HEAT BARRIER

The Adhesive Backed Heat Barrier protects parts and components from radiant heat. It can be used in
applications to protect painted surfaces, plastic parts or any component from the damaging effects of radiant
heat.

Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective
surface of the material is capable of withstanding radiant temperatures in excess of 2000°F.

The adhesive backed composite construction material can easily be applied to any surface or wrapped
around a hose or wire to make a clean professional appearance.

The Spark Plug Wire Heat Shield offers the ultimate protection for spark plug wires and boots from
conductive and radiant heat.

The dual-purpose sleeve has a surface that reflects over 90% of radiant heat, while the inside silica-based
fabric prevents conductive heat from penetrating.

Thermo-Flex Plug Wire Heat Shield is a composite heat shield material with unlimited uses. The material is
manufactured with a combination of materials to provide abrasion-resistance, thermal insulation, and
physical containment of hoses and wiring.

The combination of aluminum, silica, and stainless steel is combined to produce a sleeving that is flexible,
lightweight, and strong. The aluminum-silica combination can be slit for applications such as wire looms or
hose covering without disconnecting the ends of the wire or hoses.

Thermo-Flex Plug Wire Heat Shields can withstand extreme temperatures of up to 750°F.

Thermo-Flex Aluminum is a composite heat shield material with unlimited uses. The material is
manufactured with a combination of materials to provide abrasion-resistance, thermal insulation, and
physical containment of hoses and wiring.

The combination of aluminum, silica, and stainless steel is combined to produce a sleeving that is flexible,
lightweight, and strong.

The aluminum-silica combination can be slit for applications such as wire looms or hose covering without
disconnecting the ends of the wire or hoses. Thermo-Flex Aluminum can withstand extreme temperatures of
up to 750°F and is available in four different colors.

The World's only acid-neutralizing heat barrier mat. It reflects over 90% of radiant heat, traps and
neutralizes battery acid, protects against corrosion, is recyclable, protects the environment, and is
inexpensive and easy to install.

The Battery Heat Barrier Kit is completely safe to handle before and during installation. It is used by all
branches of the United States military. The Battery Heat Barrier Kit is also available in rolls or mats.

Keep your induction air cool with this unique lace up tube cover. The design of the cover allows it to fit from
2-1/2 inch to 4 inch air filter tubes up to 36 inches long. The lace on induction kit/air filter heat shield blocks
over 98% of the radiant heat of the turbo and exhaust.

The kit comes complete with four different color laces, blue, yellow, red and white.

Street and Circuit - Products & Services

Authorised Dealer of all products listed.
In stock parts delivered within 3 days anywhere in Greece including, Αθήνα, Θεσσαλονίκη, Λάρισα, Πάτρα, Ηράκλειο, Καβάλα,
Ιωάννινα, Αλεξανδρούπολη, Σέρρες, Ξάνθη κ.α
Full Manufacturers Warranty on all Parts.
Payment on Delivery Service offered on all products.
Full manufacturers service back up on all parts.
Performance Tuning Part Fitting available in Thessaloniki through our Service Partner.
Price Match Policy.
Performance Tuning Parts Sourced Direct from Japan on request.
Brand Name In Car Entertainment and Car Audio products Imported Direct from the UK. Contact Us for a quote

The flexible clamp on pipe heat shield blocks over 98% of the damaging radiant heat of the exhaust.The
High-tech composite construction of the heat shield provides the ultimate in protection.

The kits come complete with all clamps and install in minutes.

Clamp-on pipe heat shields are available in one, two and three foot lengths. Clamp-on pipe heat shields
incorporate Thermo-Tec's proprietary coating technology developed by Thermo-Tec, Thermal Conduction
Technology